Product center
National Hotline:
0731-85516578
Sales Address:Changsha City Furong District Wanjia Li Zhong Road, Section 166, East County, Block A, Block
Mobile:18975167997
Contact:Deng Manager
Fax:0731-85535848
E-mail:cssc98@126.com
Concern us
Add the official public WeChat account, or scan the bottom two-dimensional code, access to the latest developments.
Lubricating oil analyzer
- SC-0193 Lube oil oxidation stability tester
- The instrument is designed and manufactured in accordance with the requirements specified in the industry standard SH/T193 Determination of the Oxidative Stability of Lube Oil (Rotary Oxygen Bomb Method) of the People's Republic of China,
- Advisory
- This product cumulative sales:
Instrument Overview Technical Parameters Performance characteristics
The instrument is designed and manufactured in accordance with the requirements specified in the industry standard SH/T193 Determination of the Oxidative Stability of Lube Oil (Rotary Oxygen Bomb Method) of the People's Republic of China, with industrial computer automatic control. Applies to the determination of the oxidation stability of new and in-service turbine oils with the same composition (base oils and additives), and may also be used to evaluate new mineral insulating oils containing 2, 6-di-tert-butyl-p-Cresol as a rapid method of evaluating their oxidation stability;
1. Operating power supply: AC220, ± 10% v, 50HZ
2. Heating tube power: 2500W
3. Pressure sensor range: 0~1.6 MPa, accuracy: ± 2%
4. Oil bath temperature control range: room temperature~200.0 ° C continuously adjustable
5. Temperature control accuracy: ± 0.1 ° C
6. Test form: two rounds, two test specimens can be made at the same time
7. Rotary mechanism speed: 100 ± 5r/min
8. Angle of oxygen bomb from horizontal: 30 °
9. Oil bath volume: 30 L;
10. Display and control mode: 10.2 inch color liquid-crystal touch screen
1. The instrument is designed and manufactured to meet the SH/T193 standard with a powerful software data processing system.
2. It can automatically perform pressure detection, data recording, oxidation time calculation on the tested oil sample, and can automatically end the test.
3. The entire test process of the instrument was automated and simple to operate. Automatic judgment of pressure inflection point and automatic end of test
4. Automatic recording of data and test results during testing. The historical records were queried and compared, and the pressure curves were printed.
5. Original imported rotating gear with stable rotational speed and low noise.