Product center
National Hotline:
0731-85516578
Sales Address:Changsha City Furong District Wanjia Li Zhong Road, Section 166, East County, Block A, Block
Mobile:18975167997
Contact:Deng Manager
Fax:0731-85535848
E-mail:cssc98@126.com
Concern us
Add the official public WeChat account, or scan the bottom two-dimensional code, access to the latest developments.
Grease detection analyzer
- SC-269 grease shear tester
- This instrument is designed and manufactured in accordance with the national standard GB/T 269 "Method for Determining the Cone Penetration of Lubricating Greases and Petroleum Greases" and in accordance with the requirements for full-size workpieces in international standards such as ISO 2137 "Method for Determining the Cone Penetration of Lubricating Greases and Petroleum Greases".
- Advisory
- This product cumulative sales:
Instrument Overview Technical Parameters Performance characteristics
This instrument is designed and manufactured in accordance with the national standard GB/T 269 "Method for Determining the Cone Penetration of Lubricating Greases and Petroleum Greases" and in accordance with the requirements for full-size workpieces in international standards such as ISO 2137 "Method for Determining the Cone Penetration of Lubricating Greases and Petroleum Greases". It is suitable for measuring the working cone penetration or extending the working cone penetration of lubricating greases and petroleum greases under the above standards, and conducting 60 or 100000 shear tests. After mechanical shearing, the consistency of lubricating grease changes, and then it is measured using a cone penetration tester to evaluate the mechanical stability of lubricating grease and stone grease.
1, working power supply: AC220V + 10% 50Hz
2, spindle speed: 1400r/min
3, reduction ratio: 1:25
4, control times: 1s ~ 99H (can be set arbitrarily)
5, the number of work: two
6, motor power: 375W
7, the overall size: 500 x 600 x 450 (mm)
8, instrument weight: about 120Kg
1, the instrument is a double acting reciprocating test equipment.
2, the use of plum shaped elastic coupling reducer.
3, the use of digital timer to control the number of shear, shear number can be set freely.
4, automatic digital recording cutting times, when the number of times to reach the set value automatically stop.
5, the instrument is mainly composed of spindle motor, reducer, full size work device, counter, counting sensor and base.
6, spindle motor using single-phase squirrel cage motor, stable operation; the base is made of thick steel plate, strong and durable.
